|
|
Making Heavenly Vanilla Soap
Using the Melt and Pour Process
by Jennifer Christine
Have you ever been to a beauty shop and smelled the aroma of absolutely
gorgeous hand-made soap and thought to yourself, “I wish I could do
something like this”? Well, the good news is that you can, with the
right tools, know-how and imagination. So why should you make your own
soap? Not only is it fun and exciting, but you get to put exactly what
you want in it, design it how you like and choose the colors and
fragrance as well. Some store-bought soaps can be full of chemicals that
can be harmful to the skin, but if you make your own you know exactly
what is in it.
What is the melt and pour process? The melt and pour process is exactly
how it sounds. You use ready-made blocks of soap that are uncolored and
unscented and you melt the soap blocks. Then you add your own colors,
fragrances and/or other additives, pour it in a mold and wait until it’s
set. Melt and pour soap bases are available from online soap suppliers
or craft stores. One of the advantages of using the melt and pour
process to make soap is that you don’t have to deal with potentially
dangerous lye.
The equipment you will need will depend entirely on the soap that you
are creating. You’ll need either a double boiler or sturdy heat
resistant microwave bowl or jug to melt the soap in and a base or mold
for the shape of the soap. Also, a couple of whisks or spoons and a set
of measuring spoons for additives. These are the basic tools you’ll need
and then you can add absolutely anything you want from there on.
Before you start, it is good to bear in mind that the soap can be
extremely hot when it has been melted, so it is best to be very careful.
If you’re using the microwave, make sure you wear protective gloves and
use a sturdy potholder to take out the microwave bowl or jug containing
the hot melted soap. It’s also a good idea to wear gloves if you’re
melting it in a double boiler, in case you accidentally splash. And make
sure you’re not disturbed by children or pets.
Now let’s try out a basic melt and pour soap recipe called Heavenly
Vanilla.
In order to make this you’re going to need the following equipment:
Clean cutting board
Double boiler or sturdy heat resistant microwave bowl or jug
Pyrex Scales (to measure soap)
4 oz or 113 grams of good quality white melt and pour soap base
Vanilla fragrance suitable for soap making
Clean metal whisk or spoon
Clean measuring spoons
Clean 3-4 oz basic soap mold
Rubbing alcohol in spray bottle
Protective gloves
Safety goggles
Protective clothes
Protective shoes
Now you have everything you need, so let’s move on to the exciting part,
making your own soap!
After you’ve put on the safety goggles, protective gloves, clothes and
shoes, you can first measure the fragrance and set it aside. Start off
using 0.25 ounce of fragrance per pound of soap; you can make it
stronger or weaker from there. So for this recipe you would use 1.9 ml
or 0.06 oz or 1/4 +1/8 US teaspoons of fragrance.
Next, weigh the soap base and melt 4 oz in either a double boiler or in
the microwave. If melting it in the microwave, cover the container with
Saran wrap to stop the soap from drying out. Melt the soap in one minute
increments in the microwave. Stir after every minute while being careful
of the hot soap base.
Once it’s totally melted, it’s time to add the vanilla fragrance that
you’ve already measured and set aside. Add it slowly and stir carefully
and gently. If you get bubbles at this stage it means you’ve stirred it
too hard.
Now you’re ready to pour it into the mold. Pour it very slowly and
gently. Avoid splashing. If you get bubbles pouring it into the mold,
spritz the surface of the soap in the mold lightly with rubbing alcohol.
Now put the mold in a safe place and leave it for a few hours. If you’re
in a hurry, you can put it in the refrigerator (not the freezer) for
about an hour until its set.
Once the soap is set (hardened), it’s time to unmold it. Unmolding soap
is just like unmolding a cake from a cake tin. Gently tap the mold then
see if the soap pops out. If it doesn’t it may need a further tap. If
the soap is really stubborn, trying running some warm water over the
bottom of the mold.
You can now use your Heavenly Vanilla soap right away!
Making soap can be good fun and the satisfaction that comes afterwards
is great. So why not make your own soap today?
About the author
More Details about soap making recipe here. Jennifer Christine is a
Super Soap Making Enthusiast! Grab your FREE exclusive mini report,
Secret Online Soap Making Supplies when you visit
http://www.MakeYourOwnSoapToday.com and discover how you can make
your own hand made soap today!
|
|
